Influence of endodontic sealers artifacts in the detection of vertical root fractures

Abstract The aim of this study was to compare the influence of endodontic sealers artifacts on the detection of vertical root fracture in cone beam computed tomography (CBCT). Premolars and central incisors were assigned into five different groups: Control, Pulp Canal Sealer, AH Plus, Sealer 26, and BC Sealer (n= 10, per group). VRFs were mechanically induced and the teeth were inserted into an image phantom. Subsequently, CBCT (Cranex 3Dx, Soredex, Tuusula, Finland) images were obtained and two observers were asked separately to identify root fracture, by visual analysis. For both premolar and central incisors, kappa coefficients of intraobserver agreement varied from good to excellent (K: 80% - 87%), and the values for interobserver agreement varied from fair to moderate (K: 30% - 35%). As follows, the area under the curve (AUC) of receiver operating characteristic (ROC) values for VRFs highlighted that the use of BC sealer reduced the observers' ability to discriminate VRFs relative to other sealers. Moreover, sensitivity values for premolars teeth ranged from 20% to 60%, and specificity ranged from 60% to 100%; while sensitivity values for central incisors ranged from 30% to 70%, and specificity ranged from 70% to 100%. In conclusion, the low sensitivity values, mainly for premolars, demonstrated the difficulty in VRF diagnosis. Furthermore, BC Sealer induced significantly more imaging artifacts than other sealers. These results highlighting that endodontic sealers may interfere with the diagnosis of VRFs.

Resumo O objetivo deste estudo foi comparar a influência dos artefatos de cimentos endodônticos na detecção de fratura radicular vertical (FRV) em tomografia computadorizada de feixe cônico (TCFC). Pré-molares e incisivos centrais foram divididos em cinco grupos diferentes: Controle, Pulp Canal Sealer, AH Plus, Sealer 26 e BC Sealer (n = 10, por grupo). As FRVs foram induzidas mecanicamente e os dentes inseridos em uma réplica da mandibula humana. Posteriormente, imagens de TCFC (Cranex 3Dx, Soredex, Tuusula, Finlândia) foram obtidas e dois observadores foram solicitados a identificar fratura radicular separadamente, o critério utilizado foi a análise visual. Tanto para pré-molares quanto para incisivos centrais, os coeficientes kappa de concordância intraobservador variaram de bom a excelente (K: 80% - 87%), e os valores de concordância interobservador variaram de regular a moderado (K: 30% - 35%). A seguir, a área sob a curva (AUC) dos valores da característica de operação do receptor (ROC) para FRVs destacou que o uso do cimento BC Sealer reduziu a capacidade dos observadores de discriminar FRVs em relação a outros cimentos endodônticos. Além disso, os valores de sensibilidade para pré-molares variaram de 20% a 60%, e a especificidade variou de 60% a 100%; enquanto os valores de sensibilidade para incisivos centrais variaram de 30% a 70%, e a especificidade variou de 70% a 100%. Em conclusão, os baixos valores de sensibilidade, principalmente para pré-molares, demonstraram uma dificuldade no diagnóstico de FRV. Além disso, o BC Sealer induziu significativamente mais artefatos de imagem do que outros cimentos. Esses resultados evidenciam que os cimentos endodônticos podem interferir no diagnóstico das FRVs.

Diagnosis of alveolar and root fractures: an in vitro study comparing CBCT imaging with periapical radiographs

Abstract Objective To compare periapical radiograph (PR) and cone-beam computed tomography (CBCT) in the diagnosis of alveolar and root fractures. Material and Methods Sixty incisor teeth (20 higid and 40 with root fracture) from dogs were inserted in 60 anterior alveolar sockets (40 higid and 20 with alveolar fracture) of 15 macerated canine maxillae. Each fractured socket had a root fractured tooth inserted in it. Afterwards, each maxilla was submitted to PR in two different vertical angulation incidences, and to CBCT imaging with a small field of view (FOV) and high-definition protocol. Images were randomized and posteriorly analyzed by two oral and maxillofacial radiologists two times, with a two-week interval between observations. Results Sensitivity and specificity values were good for root fractures for PR and CBCT. For alveolar fractures, sensitivity ranged from 0.10 to 0.90 for PR and from 0.50 to 0.65 for CBCT. Specificity for alveolar fractures showed lower results than for root fractures for PR and CBCT. Areas under the ROC curve showed good results for both PR and CBCT for root fractures. However, results were fair for both PR and CBCT for alveolar fractures. When submitted to repeated measures ANOVA tests, there was a statistically significant difference between PR and CBCT for root fractures. Root fracture intraobserver agreement ranged from 0.90 to 0.93, and alveolar fracture intraobserver agreement ranged from 0.30 to 0.57. Interobserver agreement results were substantial for root fractures and poor/fair for alveolar fractures (0.11 for PR and 0.30 for CBCT). Conclusion Periapical radiograph with two different vertical angulations may be considered an accurate method to detect root fractures. However, PR showed poorer results than CBCT for the diagnosis of alveolar fractures. When no fractures are diagnosed in PR and the patient describes pain symptoms, the subsequent exam of choice is CBCT.

Detection of horizontal root fracture using four different protocols of cone-beam computed tomography

The purpose of this study was to analyze four different cone-beam computed tomography (CBCT) protocols to identify horizontal root fractures (HRF) in endodontically treated teeth, with or without the presence of a metallic post. Thirty extracted single-rooted human premolars were treated endodontically. Afterwards, an observer induced a horizontal fracture in 15 teeth. Each tooth was inserted in an empty mandibular socket and submitted to a computed tomography scan taken with and without the metallic post. The acquisition followed four different protocols, with different fields of view (FOV) and voxel sizes, as follows: FOV 6X16 cm/0.2 mm voxel; FOV 6X16 cm/0.25 mm voxel; FOV 8X8 cm/0.2 mm voxel; FOV 8X8 cm/0.25 mm voxel. Two observers checked all the acquisitions within a two-week interval, and the values of sensitivity, specificity, accuracy and kappa were calculated. The sensitivity, specificity and accuracy values were better for the 8X8 cm/0.2 mm and 16X6 cm/0.25 mm protocols, ranging from 0.60 to 0.86 and 0.53 to 0.80, respectively. The intra- and interobserver concordance ranged from 0.65 to 0.72. The protocols where FOV and voxel were proportional showed better results. The 8x8 cm/0.2 mm protocol had the least interference from the metallic artifact. All four protocols showed a decline in values in the presence of the metallic artifact.

CBCT-based evaluation of integrity of cortical sinus close to periapical lesions

The purpose of the present study was to test the applicability of cone beam computed tomography (CBCT) to evaluate the integrity of the cortical sinus close to periapical lesions. Two observers analyzed samples of 64 alveoli of first molar roots in macerated swine maxillas prepared with perchloric acid to simulate periapical lesions. The specimens were evaluated using CBCT (55-mm high and 100-mm diameter cylinder at 0.2-mm voxel resolution) for the presence of oroantral communication (OAC) caused by the simulated lesions. Sensitivity, specificity, and accuracy were calculated. Fair values were obtained for accuracy (66%-78%) and good values for specificity (70%-98%), whereas the values for sensibility showed relevant variation (41%-78%). For this reason, the interobserver agreement score was weak. CBCT proved capable of evaluating the integrity of the cortical sinus (absence of oroantral communication) when it lies close to an apical periodontitis lesion. However, the low interobserver agreement reflects the difficulty in performing diagnoses when OAC is adjacent to a periapical lesion, using the acquisition protocol adopted in this research. This could be attributed to the high level of image noise.

Assessment of open source software for CBCT in detecting additional mental foramina

The purpose of this study was to evaluate which post-processing imaging protocol would be better to analyze the additional mental foramen (AMF) in preoperative planning with cone-beam computed tomography (CBCT) exams, and to test reproducibility of measurements, using open source software (OsiriX). The software was used to detect the cases of AMF from among 58 exams for dental implant planning in edentulous mandible areas-three cases were found. The case images were submitted to qualitative analysis using 2D orthogonal MPR, 3D-MPR and 3D volume rendering protocols by two oral and maxillofacial radiologists. Quantitative analysis used the 3D-MPR protocol; the closed polygon tool measured the mental foramen (MF) and the AMF areas; the length tool measured the distance between foramina. The measurements were performed independently by the examiners, at two different times. Intra- and interexaminer agreement was assessed using the intraclass correlation coefficient. The panoramic view did not show the MF and the AMF clearly. The AMF could be detected in the parasagittal view. 2D Orthogonal MPR was effective to observe the AMF in some cases. The 3D-MPR and 3D view protocols were the most effective to locate and analyze the AMF. In conclusion, a 3D view improves visualization when anatomical points are not clearly visible. 3D-MPR was considered a more effective post-processing imaging protocol to observe foramina relationships. The high reproducibility of measurements for anatomical MF variations was established using specific tools featured in open source software for CBCT. OsiriX is realistic and recommended for preoperative planning.

Detection of simulated incipient furcation involvement by CBCT: an in vitro study using pig mandibles

The aim of the present study was to test the reproducibility, sensitivity, and specificity of cone-beam computed tomography (CBCT) in detecting incipient furcation involvement. Fifteen macerated pig mandibles, with intact second molar teeth and preserved adjacent cortical areas, were used. Simulated lesions were created in the furcation region of these teeth by applying 70% perchloric acid in up to four possible buccal/lingual sites in the right/left sides of each mandible. The mandibles were then submitted to a CBCT scan. Two blinded and calibrated experienced oral and maxillofacial radiologists interpreted the exams. Furcation involvement was also assessed in the regions without simulated lesions. CBCT showed high levels of accuracy, ranging from 78% to 88%. The variations in Kappa values for intra- and inter-observer agreement (0.41-0.59) were considered moderate. CBCT can be considered a reliable and accurate method for detecting incipient furcation involvement.

Comparison between cone-beam and multislice computed tomography for identification of simulated bone lesions

There are many studies that compare the accuracy of multislice (MSCT) and cone beam (CBCT) computed tomography for evaluations in the maxillofacial region. However, further studies comparing both acquisition techniques for the evaluation of simulated mandibular bone lesions are needed. The aim of this study was to compare the accuracy of MSCT and CBCT in the diagnosis of simulated mandibular bone lesions by means of cross sectional images and axial/MPR slices. Lesions with different dimensions, shape and locularity were produced in 15 dry mandibles. The images were obtained following the cross sectional and axial/MPR (Multiplanar Reconstruction) imaging protocols and were interpreted independently. CBCT and MSCT showed similar results in depicting the percentage of cortical bone involvement, with great sensitivity and specificity (p < 0.005). There were no significant intra- or inter-examiner differences between axial/MPR images and cross sectional images with regard to sensitivity and specificity. CBCT showed results similar to those of MSCT for the identification of the number of simulated bone lesions. Cross sectional slices and axial/MPR images presented high accuracy, proving useful for bone lesion diagnosis.

Aplicações da tomografia computadorizada em Ortodontia: "o estado da arte" / Computed tomography applications in Orthodontics: the state of the art

O objetivo deste artigo é informar, ao ortodontista e ao pesquisador, sobre o atual estágio de desenvolvimento tecnológico das imagens craniofaciais geradas por Tomografia Computadorizada Helicoidal Multislice (TC Multislice) e por Tomografia Computadorizada de Feixe Crônico (TCFC), bem como suas aplicações em Ortodontia, Ortopedia Facial e Cirurgia Ortognática. Pretende-se apresentar as múltiplas aplicações clínicas e potenciais para pesquisas científicas das imagens tridimensionais (3D-TC) em Ortodontia. Como as modalidades atuais de tratamento ortodôntico estão se tornando mais sofisticadas, a necessidade de registros tridimensionais (3D) precisos dos pacientes se torna cada vez mais crítica, e a adoção da TCFC em conjunto com a TC Multislice levará os ortodontistas a uma mudança de paradigma com relação aos meios de diagnóstico por imagem, inclusive com potenciais alterações nos planejamentos dos tratamentos ortodônticos e ortodôntico-cirúrgicos.

Osteochondroma of the temporomandibular joint: a case report

Osteochondroma of the mandibular condyle has been found in the oral and maxillofacial region rarely. This paper describes a case of osteochondroma of the mandibular condyle in a 20-year-old woman, who was referred to our service with facial asymmetry, prognathic deviation of chin, cross-bite to the contralateral side, changes in condylar morphology, limited mouth opening, and malocclusion. Computed tomography (CT) was performed for better evaluation to the pathological conditions on the temporomandibular joint. Based on the clinical examination, patient history, and complementary exams, the hypothesis of osteochondroma was established. Condylectomy was performed using a preauricular approach with total removal of the lesion. After 3 years of postoperative follow up and orthodontic therapy, the patient is symptom-free, and has normal mouth opening with no deviation in the opening pattern.

Osteocondroma de côndilo mandibular é raro na região craniofacial. Este artigo descreve um caso de osteocondroma de côndilo mandibular em uma mulher de 20 anos que foi encaminhada ao nosso serviço apresentando assimetria facial, desvio de mento, mordida cruzada para o lado contralateral, alterações na morfologia condilar, limitação de abertura bucal e maloclusão. Tomografia computadorizada foi realizada para melhor avaliação da condição patológica da ATM. Devido à base no exame clínico, histórico do paciente e exames complementares, foi estabelecida uma hipótese de osteocondroma. Um procedimento de condilectomia utilizando abordagem preauricular com uma total remoção da lesão foi executado. Após três anos de acompanhamento pós-operatório e ortodôntico, o paciente está livre dos sintomas e tem uma abertura normal sem desvio de padrão durante a abertura.

Accuracy assessment of human sphenoidal sinus volume and area measure and its relationship with sexual dimorphism using the 3D-CT / Avaliação da precisão das medidas de volume e área do seio esfenoidal humano em relação ao dimorfismo sexual utilizando a TC-3D

Introduction - The purpose of this study was to evaluate the precision of volumetric measurements of sphenoidal sinuses and the obtention of sexual dimorphism, using spiral computed tomography (CT). Materials and Methods - Fifty individuals were studied (25 male and 25 female),examined with CT multiplanar reconstructions in sagital and coronal views, and in 3DCT. The statistical analysis was obtained by using the Levene test, and t-test. Results - The method used is over the inadequate limit for area measurements, and the method is acceptable for volume, but needs improvement. Male individuals showed a mean higher than that female's, and a higher variation for area and volume. Conclusion - The spiral CT is helpful in sphenoidal sinus region study, showing precision for volume only. There was a significant difference between the mean values of the two genders, so the method can be used to determine sexual dimorphism.

Introdução - O objetivo deste estudo foi avaliar a precisão das medidas de volume e área do seio esfenoidal humano, e a possibilidade de obtenção do dimorfismo sexual. Materiais e Métodos - Foram estudados 25 indivíduos do gênero masculino e 25 do feminino, examinados por meio da tomografia computadorizada, com reconstrução em terceira dimensão, e recursos de computação gráfica. A análise estatística foi feita utilizando os métodos de Análise de Variância para medidas repetidas (ANOVA), teste de Levene e teste-t. Resultados - O método utilizado está pouco acima do limite de não aceitação, e, quanto ao volume, é aceitável precisando ainda de melhoria. Notamos que o gênero masculino apresenta uma média aparentemente maior que o sexo feminino, bem como uma variação maior tanto em área quanto em volume. Conclusão - A tomografia computadorizada em espiral foi útil no estudo da região de seios esfenoidais, apresentando precisão adequada apenas para volume. A diferença significativa entre as médias dos valores dos grupos masculino e feminino possibilita afirmar que há possibilidade de utilização do método para avaliação do dimorfismo sexual.

Avaliação da precisão das medidas de volume e área do seio esfenoidal humano em relação ao dimorfismo sexual utilizando a TC-3D / Accuracy assessment of human sphnoidal sinus volume and area measure and its relationship with sexual dimorphism the 3D-CT

Introdução - O objetivo deste estudo foi avaliar a precisão das medidas de volume e área do seio esfenoidal humano, e a possibilidade de obtenção do dimorfismo sexual. Materiais e Métodos - Foram estudados 25 indivíduos do gênero masculino e 25 do feminino, examinados por meio da tomografia computadorizada, com reconstrução em terceira dimensão, e recursos de computação gráfica. A análise estatística foi feita utilizando métodos de Análise de Variância para medidas repetidas (ANOVA), teste de Levene e teste-t. Resultados - O método utilizado está pouco acima do limite de não aceitação, e, quanto ao volume, é aceitável precisando ainda de melhoria. Notamos que o gênero masculino apresenta uma média aparentemente maior que o sexo feminino, bem como uma variação maior tanto em área quanto em volume. Conclusão - A tomografia computadorizada em espiral foi útil no estudo da região de seios esfenoidais, apresentando precisão adequada apenas para volume. A diferença significativa entre as médias dos valores dos grupos masculino e feminino possibilita afirmar que há possibilidade de utilização do método para avaliação do dimorfismo sexual

Evaluation of simulated bone lesion in the head of the mandible by using multislice computed tomography

Conventional radiography has shown limitation in acquiring image of the ATM region, thus, computed tomography (CT) scanning has been the best option to the present date for diagnosis, surgical planning and treatment of bone lesions, owing to its specific properties. OBJECTIVE: The aim of the study was to evaluate images of simulated bone lesions at the head of the mandible by multislice CT. MATERIAL AND METHODS: Spherical lesions were made with dental spherical drills (sizes 1, 3, and 6) and were evaluated by using multislice CT (64 rows), by two observers in two different occasions, deploying two protocols: axial, coronal, and sagittal images, and parasagittal images for pole visualization (anterior, lateral, posterior, medial and superior). Acquired images were then compared with those lesions in the dry mandible (gold standard) to evaluate the specificity and sensibility of both protocols. Statistical methods included: Kappa statistics, validity test and chi-square test. Results demonstrated the advantage of associating axial, coronal, and sagittal slices with parasagittal slices for lesion detection at the head of the mandible. RESULTS: There was no statistically significant difference between the types of protocols regarding a particular localization of lesions at the poles. CONCLUSIONS: Protocols for the assessment of the head of the mandible were established to improve the visualization of alterations of each of the poles of the mandible's head. The anterior and posterior poles were better visualized in lateral-medial planes while lateral, medial and superior poles were better visualized in the anterior-posterior plane.

CT assessment of the correlation between clinical examination and bone involvement in oral malignant tumors

Oral cancers have a tendency to invade the surrounding bone structures, and this has a direct influence on the treatment management and on outcomes. The objective of this study was to correlate the clinical parameters (location, clinical presentation and TNM staging) of oral malignant tumors that can be associated with a potential of bone invasion and determine the accuracy of clinical examination to predict bone involvement, using computed tomography (CT). Twenty five patients, with oral malignant tumors were submitted to clinical and CT examinations. CT was considered the standard parameter to evaluate the presence of bone involvement. Clinical assessment of location, presentation form and TNM staging of the tumors were then compared to the CT findings in predicting bone involvement. Bone involvement was observed in 68 percent of the cases. It was predicted that tumors located in the retromolar trigone and hard palate, with a clinical aspect of infiltrative ulcer or nodule and classified in stage IV had a high potential to cause bone involvement. The clinical examination assessment of these tumors showed to be a valuable tool to predict bone invasion, with high sensitivity (82 percent) and specificity (87.5 percent), based on the results found in the CT images. No statistical significance was found between the CT and clinical examinations regarding bone involvement. The identification of some clinical parameters such as location, clinical presentation, and TNM stage, associated with a detailed clinical examination, was considered a valuable tool for the assessment of bone destruction by oral malignant tumors.

Fibroma ossificante periférico atípico em mandíbula / Atypical peripheral ossifying fibroma in mandible

Este é um relato de caso de Fibroma Ossificante Periférico (FOP) atípico na mandíbula do lado direito, em paciente do sexo masculino de 17 anos. A importância desse caso inclui o tamanho da lesão, comprometimento de tecido mole, dentes e osso. Exames complementares foram realizados, como radiografia panorâmica convencional, punção, tomografia computadorizada e a biópsia incisional. Após o diagnóstico definitivo, foi feita a excisão completa da lesão, juntamente com os dentes envolvidos. O objetivo deste relato éevidenciar esse caso atípico de FOP e as ferramentas utilizadas para o auxílio de seu diagnóstico e planejamento cirúrgico.

This is a case report of Peripheral Ossifying Fibroma (POF) on the right side of the mandible in a seventeen-year-old male. The importance of the case includes the size of the lesion, soft tissue, teeth and bone involved. Complementary exams were performed, like panoramic radiography, punction, computed tomography and incisional biopsy. After the definitive diagnosis, total excision of the lesion was made, together with the teeth involved. The objective of this case report is to show this atypical case of POF and the tools used to help the diagnosis and surgical planning.

Cisto nasolabial bilateral: relato de dois casos / Bilateral nasolabial cyst: report of two cases

O cisto nasolabial caracteriza-se como lesão não-odontogênica de partes moles, rara e com ocorrência em situação paramediana, anteriormente ao rebordo alveolar da maxila e à asa do nariz. Portratar-se de lesão de tecido mole, geralmente não produz alteração radiográfica. No presente trabalho são descritos dois casos de cisto nasolabial, nos quais são evidenciados aspectos relevantes em relação ao diagnóstico diferencial por meio de tomografia computadorizada e ressonância magnética, bem como os aspectos atípicos encontrados em um dos casos relatados, como bilateralidade e diferença de intensidade de sinal à ressonância magnética. São discutidos, ainda, fatores determinantes para o diagnóstico diferencial de lesões de tecido mole do complexo maxilofacial,como cistos fissurais de ocorrência central (sagital), entre eles dermóides, palatinos e nasopalatinos (cisto do canal do incisivo), e cistos de fissura lateral.

The nasolabial cyst is defined as nonodontogenic soft tissue lesion, rare and with occurrence in sagittal plane, between midline and nasal cartilage. Because its soft tissue composition, there is no radiographic presentation in conventional radiographic examination,being indicated evaluation through computed tomography and magnetic resonance imaging. In the present study, two cases are discussed, being one in white female subject, 72-year-old, and other in a black male subject, 24-year-old. The authors discuss about relevant aspects related to differential diagnosis through computed tomography and magnetic resonance imaging, as wellas atypical features founded in one of the cases, like bilateral occurrence with different signal intensity in magnetic resonance imaging and determinant factors for differential diagnosis of softtissues pathologies of maxillofacial complex, as fissure cysts with central occurrence (sagittal cysts), as dermoid cysts, palatine and nasopalatine and lateral fissure cysts.

Comparative study of single and multislice computed tomography for assessment of the mandibular canal

OBJECTIVE: The purpose of this study was to evaluate the accuracy of relative measurements from the roof of the mandibular canal to the alveolar crest in multislice (multidetector) computed tomography (MDCT) and single-slice computed tomography (SSCT). MATERIAL AND METHODS: The sample consisted of 26 printed CT films (7 SSCT and 19 MDCT) from the files of the LABI-3D (3D Imaging Laboratory) of the School of Dentistry of the University of São Paulo (FOUSP), which had been acquired using different protocols. Two observers analyzed in a randomized and independent order a series of 22 oblique CT reconstructions of each patient. Each observer analyzed the CT scans twice. The length of the mandibular canal and the distance between the mandibular canal roof and the crest of the alveolar ridge were obtained. Dahlberg test was used for statistical analysis. RESULTS: The mean error found for the mandibular canal length measurements obtained from SSCT was 0.53 mm in the interobserver analysis, and 0.38 mm for both observers. On MDCT images, the mean error was 0.0 mm in the interobserver analysis, and 0.0 and 0.23 mm in the intraobserver analysis. Regarding the distance between the mandibular canal roof and the alveolar bone crest, the SSCT images showed a mean error of 1.16 mm in the interobserver analysis and 0.66 and 0.59 mm in the intraobserver analysis. In the MDCT images, the mean error was 0.72 mm in the interobserver analysis and 0.50 and 0.54 mm in the intraobserver analysis. CONCLUSION: Multislice CT was demonstrated a more accurate method and demonstrated high reproducibility in the analysis of important anatomical landmarks for planning of mandibular dental implants, namely the mandibular canal pathway and alveolar crest height.

Computed tomography imaging strategies and perspectives in orbital fractures

OBJECTIVE: The objective of this study was to demonstrate the sensitivity and specificity of multislice computed tomography (CT) for diagnosis of orbital fractures following different protocols, using an independent workstation. MATERIALS AND METHODS: CT images of 36 patients with maxillofacial fractures (symptomatic to orbit region) who were submitted to multislice CT scanning were analyzed, retrospectively. The images were interpreted based on 5 protocols, using an independent workstation: 1) axial (original images); 2) multiplanar reconstruction (MPR); 3) 3D images; 4) association of axial/MPR/3D images and 5) coronal images. The evaluated anatomical sites were divided according to the orbital walls: lateral (with or without zygomatic frontal process fracture); medial; superior (roof) and inferior (anterior, medial). The collected data were analyzed statistically using a validity test (Youden's J index; p<0.05). The clinical and/or surgical findings (medical records) were considered as the gold standard to corroborate the diagnosis of the anatomical localization of the orbital fracture. RESULTS: 3D-CT scanning presented sensitivity of 78.9 percent, which was not superior to that of MPR (84.0 percent), axial/MPR/3D (90.5 percent) and coronal images (86.1 percent). On the other hand, the diagnostic value of axial images was considered limited for orbital fractures region, with sensitivity of 44.2 percent. CONCLUSIONS: Except for the axial images, which presented a low sensitivity, all methods evaluated in this study showed high specificity and sensitivity for the diagnosis of orbital fractures according to the proposed methodology. This protocol can add valuable information to the diagnosis of fractures using the association of axial/MPR/3D with multislice CT.

Evaluation of TMJ articular eminence morphology and disc patterns in patients with disc displacement in MRI

The aim of this study was to assess the shape of the temporomandibular joint (TMJ) articular eminence and the articular disc configuration and position in patients with disc displacement. TMJ magnetic resonance images (MRI) of 14 patients with bilateral disc displacement without unilateral reduction were analyzed. Articular eminence morphology was characterized as box, sigmoid, flattened, or deformed. Articular disc configuration was divided into biconcave, biplanar, biconvex, hemiconvex or folded, and its position, as "a" (superior), "b" (anterosuperior), "c" (anterior) or "d" (anteroinferior). The images were divided and the sides with disc displacement with reduction (DDWR) and without reduction (DDWOR) were compared. Regarding articular eminence shape, the sigmoid form presented the greatest incidence, followed by the box form, in the DDWR side, although this was not statistically significant. In the DDWOR side, the flattened shape was the most frequent (p = 0.041). As to disc configuration, the biconcave shape was found in 79 percent of the DDWR cases (p = 0.001) and the folded type predominated in 43 percent of the DDWOR cases (p = 0.008). As to disc position, in the DDWR side, "b" (anterosuperior position) was the most frequent (p = 0.001), whereas in the DDWOR side, "d" (anteroinferior position) was the most often observed (p = 0.001). The side of the patient with altered disc configuration and smaller shape of TMJ articular eminence seems to be more likely to develop non-reducing disc displacement as compared to the contralateral side.

Objetivou-se avaliar a morfologia da eminência e a configuração e a posição do disco da articulação temporomandibular (ATM) em pacientes com deslocamento de disco. Foram analisadas imagens por ressonância magnética (IRM) da ATM de 14 pacientes com deslocamento de disco bilateral, sem redução unilateral. A morfologia da eminência articular foi caracterizada como caixa, sigmóide, aplainada e deformada. A configuração do disco articular foi dividida em bicôncava, biplanar, biconvexa, hemiconvexa e dobrada e a sua posição em "a" (superior), "b" (ântero-superior), "c" (anterior) e "d" (ântero-inferior). As imagens foram divididas e comparadas entre o lado com deslocamento de disco com redução (DDCR) e o lado sem redução (DDSR). Quanto à forma da eminência articular, a forma sigmóide foi a mais incidente, seguida da caixa, no lado com DDCR, embora esta diferença não tenha sido estatisticamente significante. No lado com DDSR, a forma aplainada foi a mais freqüente (p = 0,041). Na configuração do disco, a forma bicôncava foi observada em 79 por cento dos casos de DDCR (p = 0,001) e a dobrada em 43 por cento dos casos de DDSR (p = 0,008). Em relação à posição do disco, a posição "b" (ântero-superior) foi a mais freqüente no lado com DDCR (p = 0,001), enquanto que no lado com DDSR, foi a "d" (ântero-inferior) (p = 0,001). O lado do paciente com alteração na configuração do disco e uma forma menor da eminência articular da ATM parece ter mais chance de desenvolver o deslocamento do disco sem redução quando comparado ao outro lado.

Aplicação de medidas cefalométricas em 3D-TC / Application of cephalometric measurements in 3D-TC

OBJETIVO: o objetivo desta pesquisa foi avaliar a precisão e acurácia (validade) de medidas cefalométricas lineares em imagens reconstruídas em terceira dimensão (3D), pela técnica de volume, a partir da tomografia computadorizada (TC) multislice. METODOLOGIA: o material da pesquisa consistiu de 10 (dez) crânios secos, previamente selecionados, sem distinção de etnia ou gênero, os quais foram submetidos à TC multislice 16 cortes com 0,5mm de espessura por 0,3mm de intervalo de reconstrução. Posteriormente, os dados obtidos foram enviados para uma estação de trabalho independente, contendo o programa Vitrea®. Os pontos cefalométricos (n=13) foram localizados e as respectivas medidas ósseas lineares (n=15) foram realizadas por 2 examinadores, previamente treinados, medindo cada um duas vezes, independentemente, em 3D. As medidas físicas foram obtidas por um terceiro examinador, utilizando um paquímetro digital. A análise dos dados foi realizada mediante um estudo comparativo entre as medidas inter e intra-examinadores, em 3D-TC, e entre estas e as medidas físicas obtidas diretamente nos crânios, utilizando ANOVA (análise de variância). RESULTADOS: não foram encontradas diferenças estatisticamente significantes entre os valores das medidas inter e intra-examinadores, nem entre as medidas físicas e em 3D, com p>0,6 para todas as medidas. O erro percentual foi de 2,05 por cento para as medidas interexaminadores e de 2,11 por cento para as medidas intra-examinadores. A média do erro percentual entre as medidas físicas e em 3D variou de 0,96 por cento a 1,47 por cento. CONCLUSÃO: todas as medidas cefalométricas lineares foram consideradas precisas e acuradas utilizando a técnica de volume em 3D por meio da TC multislice.

AIM: To test the precision and accuracy of conventional linear cephalometric measurements in 3D reconstructed images using a multislice CT. METHODS: The study population consisted of 10 dry skulls, previously selected, without distinction of ethnic group and sex, which were submitted to a multislice CT 16 slices using 0.5mm of slice thickness and 0.3mm of interval of reconstruction. Subsequently the data was sent to an independent workstation. Conventional craniofacial landmarks (n=13), usually applied to facial orthopedic and orthodontic treatment planning, were localized and linear measurements (n=15) were obtained by 2 radiologists, twice each, independently, in 3D-CT images. In total 600 measurements were made. The correspondent physical measurements were obtained by a third examiner using a digital caliper. Statistical evaluation of the measurements was carried out regarding to inter and intra-examiner, in 3D-CT, and between image and physical measurements from dry skulls, using analysis of variance. RESULTS AND CONCLUSIONS: There were no statistically significant differences between inter and intra-examiner measurements or between imaging and physical measurements. The results also showed an inter-examiner variability error of 2.05 percent, and an intra-examiner variability error of 2.11 percent. There were also no statistically significant differences between imaging and physical measurements with p>0.6 for all measurements. The mean difference was from 0.96 percent to 1.47 percent for all measurements. The validity of linear cephalometric measurements was established using 3D volume rendering from a multislice CT with high precision and accuracy.

Computed tomography imaging findings of simultaneous bifid mandibular condyle and temporomandibular joint ankylosis: case report

Bifid mandibular condyle is an uncommon entity described in the literature as having a controversial etiology. Despite the absence of clinical symptomatology, the radiologist must be aware and should have some knowledge of this abnormality, as well its implications regarding functional and morphological changes. TMJ ankylosis is a disabling disease with involvement of the mandibular condyle, articular fossa and base of the skull. The association of bifid condyle with temporomandibular joint ankylosis is rare and must be carefully evaluated. The purpose of this paper is to report a case of simultaneous bifid mandibular condyle and temporomandibular joint ankylosis and to describe its computed tomography imaging findings.

O côndilo mandibular bífido (BMC) é uma entidade incomum descrita na literatura e de etiologia controversa. Apesar da ausência de sintomatologia clínica, o radiologista deve estar alerta e deve ter conhecimento a respeito desta anormalidade, bem como suas implicações funcionais e mudanças morfológicas. A anquilose de articulação temporomandibular é uma patologia incapacitante com envolvimento do côndilo mandibular, fossa articular e base do crânio. A associação entre côndilo mandibular bífido e anquilose temporomandibular é rara e deve ser avaliada cuidadosamente. O objetivo deste artigo é relatar um caso simultâneo de côndilo mandibular bífido (BMC) e anquilose temporomandibular e descrever seus achados em tomografia computadorizada (CT).